Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

New FIR laser lines and frequency measurements in CD3OD

Twenty-four new submillimeter laser lines in fully deuterated methyl alcohol (CD₃OD) in the wavelength range from 52 to 328 m have been obtained in a Fabry-Perot FIR resonator by optically pumping the methanol with a cw CO₂ laser. We have made accurate wavelength measurements and have determined the relative polarization of most of the known CD₃OD laser lines. The frequencies of 13 of the strongest lines were also measured.Contribution of the U.S. Government, not subject to copyright.     

高频介质系统介电性能与相组成的定量关系分析

采用普通电子陶瓷工艺制备两种高频介质系统ZnO-B2O3-SiO2三元系和BaO-PbO-Nd2O3-Bi2O3-TiO2五元系,通过XRD分析确定各系统的主晶相, 运用衍射峰强度计算法准确测定出各组分的体积百分含量,并代入Lichnetecker对数混合定则,计算出系统的介电性能,获得了分析介质系统介电性能与物相含量之间定量关系的新方法.     

紫外预电离TEA CO2激光器放电特性的实验研究

 横向激励大气压（transversely excited atmospheric,TEA）CO₂激光器的放电稳定性是决定该类型激光器应用效果的关键因素。通过对采用电感充放电电路的紫外预电离激光器的实验研究，得到了激光器放电动态过程的规律，并发现残余振荡是主放电后发生弧光放电的主要原因。实验中采用不同配比的气体，并对电感充放电电路与改进后的硅堆充放电电路进行了比较。实验结果表明：增加充电电感值可以降低主放电结束后储能电容上的残余电压；而采用硅堆放电电路在主放电后仅有相对幅值很低的稳定残压，两种方案都大幅度抑制了弧光放电的形成，有效地提高了激光单脉冲能量。     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

Analysis of ES hazards in overfilling protection gauge

Gauging operations can cause electrostatic ignition in road tankers during filling operations involving flammable liquids. For this reason, gauging from above the liquid surface should not be carried out in a road tanker containing a flammable atmosphere when hazardous conditions are present.Introduction of an overfilling sensor to automatically stop the filling in case of deviation can be a safety measure to prevent overfilling of the road tanker and the generation of a rather big flammable pool.Nevertheless, this situation generates a conflict of interest with the formerly described safety measure of preventing a charged liquid to approach a counter-electrode in presence of a explosive atmosphere.This situation has been assessed in detail by using a simulation program. It was clear that the gauge could lead to an ignition already when the liquid approached the edge of the gauge. A new design was defined to prevent such hazard.     

Temperature Dependence of Integrated Intensity Bands in IR-Absoption Spectra of (NH4)2AF6 Complexes

The contribution refers to the temperature dependence of IR-absorption spectra (NH₄)₂AF₆ (A - Si and Ge). It is found that with temperature decreasing, the integrated intensities of the bands corresponding to anion fundamentals, increase, while those of cation, decrease. An explanation is given to the phenomena detected, which is based on variations in the strength of the outer-sphere interaction with the temperature, and subsequent redistribution of electron density.     

Zero Current Potentiometry for Measuring the Interface Potential at the Electrode/Solution Interface. Theoretical and Experimental Study

A novel electrochemical approach has been proposed to measure the interface potential at the electrode/solution interface based on reconstructing the three‐electrode system of a potentiostat. In this work, the method was investigated both theoretically and experimentally. Mathematical expressions, describing current? potential characteristics, were derived. Zero current potential E_zcp was defined as the potential at which the current is zero based on linear sweep voltammetry, and was determined from the I? E curve to measure the interface potential. The experimental results obtained with the couples Fe(CN)₆^3?/Fe(CN)₆^4? and Co(NH₃)₆³⁺/Co(NH₃)₆²⁺ as examples agreed well with the theory. The proposed approach exhibits an excellent performance for measuring the interface potential due to the advantages of rapidity, high stability and accuracy.     

Non‐contact evaluation of the electrical conductivity of thin metallic films by eddy current microscopy

An eddy current microscopy technique to evaluate the electrical conductivity of thin metallic films in a non‐contact manner is reported. A narrow track formed in an approximately 100 nm thick Au film was prepared, and a Co–Cr coated magnetic tip was driven to oscillate above the track both with and without current passing through the track. Despite the absence of current, the electromagnetic interaction between the tip and the stray magnetic field from the track gave rise to a phase delay in the probe. This was due to an eddy current being induced within part of the track. Moreover, measurements of the phase change in the probe oscillation for different metallic films with thicknesses of about 100 nm found this to be proportional to the electrical conductivity of the film. Finally, the electrical conductivity of an Al film was evaluated using the eddy current microscopy technique. Copyright © 2012 John Wiley & Sons, Ltd.     

Contribution à l'étude Électrochimique de Dérivés de l'Acide Mercapto-2 Pyridinecarboxylique-5. II

Abstract

Electrochemical caracteristics of 2-mercaptopyridine-5-carboxylic acid and its methylic ester have been determined using recent polarographic techniques. Measurements have been carried out as a function of parameters such as frequency, others surimposed signals and as a function of concentration and pH. Results are compared to those obtained for selectively methylated on sulfur or nitrogen atoms derivatives. Interpretations of the data are given. The optimal conditions for a quantitative determination by D.C. and differential pulse polarography are fixed.